A shared vocabulary / 67 terms

Words for what
you hear.

Use a definition as a starting point. Each word leads into a fuller explanation.

67 results

Absorption

Transfer of incident sound energy into other forms, or away from a reflected field. Its amount depends on frequency and the boundary.

Read the lesson ↗
ADSR

A synthesizer envelope convention: attack time, decay time, sustain level and release time. The sustain parameter is usually a level, not a duration.

Read the lesson ↗
Aliasing

The ambiguity in sampled data when different continuous frequencies produce the same samples. Band-limiting before sampling helps prevent it.

Read the lesson ↗
Amplitude

The size of a variation from its reference value. For a simple waveform it may mean peak size; the measurement convention must be stated.

Read the lesson ↗
Antinode

A location of maximum oscillation amplitude in a standing-wave mode. Specify whether the oscillating quantity is pressure or displacement.

Read the lesson ↗
Attack

The beginning of a sound, often described by how quickly its level rises. Spectral and noisy onset details also contribute to its character.

Read the lesson ↗
Beat

A recurring reference point in musical time. It may be implied even when no sound occurs at that instant.

Read the lesson ↗
Beating

Repeated changes in the strength of a combined signal caused by nearby frequencies. For two sine tones, the beat rate equals their absolute frequency difference.

Read the lesson ↗
Bit depth

The number of bits used to encode each amplitude sample in a specified representation. It is distinct from samples per second.

Read the lesson ↗
BPM

Beats per minute: a tempo measure that needs an identified beat unit. At 120 BPM, that beat lasts half a second.

Read the lesson ↗
Cent

A logarithmic interval unit equal to one hundredth of a 12-tone equal-tempered semitone. An octave spans 1200 cents.

Read the lesson ↗
Chord

Notes heard or understood together as a harmonic unit. Chord names and functions depend on the musical framework being used.

Read the lesson ↗
Clipping

Limiting a signal when it exceeds an allowed amplitude range. Hard clipping changes its shape and creates additional frequency components.

Read the lesson ↗
Complex tone

A tone containing more than one sinusoidal frequency component. Complex describes its ingredients, not how difficult it is to understand.

Read the lesson ↗
Consonance

A family of terms for musical stability, blending or sensory qualities. Its meaning and preference associations depend on context and listening experience.

Read the lesson ↗
Damping

Processes that remove energy from vibration, influencing decay and resonance width. Damping can be deliberate, as when a player stops a string.

Read the lesson ↗
Decay

A decrease in a sound’s level over time. Different partials can decay at different rates, changing timbre during the note.

Read the lesson ↗
Decibel

A logarithmic measure of a ratio. A sound-pressure level, digital level or gain in decibels requires a stated quantity and reference.

Read the lesson ↗
Envelope

A description of how a sound parameter changes over time. An amplitude envelope follows the broad evolution of level around the faster oscillations.

Read the lesson ↗
Equal temperament

A tuning approach that divides an octave into equal frequency-ratio steps. This publication usually means twelve equal steps unless stated otherwise.

Read the lesson ↗
Excitation

The action that supplies energy to a vibrating system, such as plucking, striking, bowing, blowing or an electrical drive.

Read the lesson ↗
Filter

A system that changes components differently according to frequency. Its effect includes magnitude and potentially phase, not only a vague change in brightness.

Read the lesson ↗
Formant

A concentration of spectral energy associated with resonant filtering, especially in speech and singing. Usage varies; a formant is not simply a harmonic.

Read the lesson ↗
Frequency

The number of cycles per second in a repeating process. Its unit is hertz, abbreviated Hz.

Read the lesson ↗
Fundamental

The lowest frequency in an ideal harmonic series. A perceived fundamental pitch can sometimes remain even when that component is absent.

Read the lesson ↗
Gain

A multiplier or ratio relating an output signal to its input. Increasing digital gain does not specify a calibrated acoustic level at the listener.

Read the lesson ↗
Harmonic

A component whose frequency is a whole-number multiple of a fundamental. The fundamental itself is the first harmonic.

Read the lesson ↗
Headroom

The margin between a signal level and an overload limit. Headroom is an amplitude constraint, not a sampling-rate property.

Read the lesson ↗
Hertz

The unit of frequency: one cycle per second. A 440 Hz sinusoid completes 440 cycles each second.

Read the lesson ↗
Inharmonicity

Departure of partial frequencies from exact whole-number multiples of one fundamental. It is a sound-structure property, not a judgement of musical worth.

Read the lesson ↗
Interference

The result of overlapping waves adding at a location. Relative phase and amplitude determine the combined variation there.

Read the lesson ↗
Interval

A relationship between two pitches. It can be described by a ratio, cents, steps or a culturally specific name.

Read the lesson ↗
Inversion

For the triads discussed here, a chord arrangement identified by which chord tone is in the bass. It is distinct from spacing the upper notes.

Read the lesson ↗
Just intonation

Tuning selected intervals using exact frequency ratios, often of small whole numbers. A specific reference and ratio set must be given.

Read the lesson ↗
Meter

A recurring organization of musical pulses into groups and levels. A time signature represents aspects of that organization within a notation tradition.

Read the lesson ↗
Mode of vibration

A characteristic pattern in which a system can vibrate, with an associated resonance frequency and spatial distribution.

Read the lesson ↗
Node

A location of zero oscillation amplitude in an ideal standing-wave mode. Pressure nodes and displacement nodes occur at different locations in an air column.

Read the lesson ↗
Nyquist frequency

Half a sample rate. Frequency content must be appropriately limited below this boundary for the standard unambiguous reconstruction argument.

Read the lesson ↗
Octave

An interval corresponding ideally to a 2:1 frequency ratio. Octave equivalence and its musical uses are cultural and perceptual questions beyond that calculation.

Read the lesson ↗
Overtone

A component above the lowest component or fundamental. The first overtone is the second harmonic only when it belongs to a harmonic series.

Read the lesson ↗
Partial

One frequency component of a sound. Partials may be harmonic or inharmonic.

Read the lesson ↗
Period

The duration of one repeating cycle. For frequency f in hertz, period equals 1/f seconds.

Read the lesson ↗
Phase

A position within a cycle, often expressed in degrees or radians. Relative phase describes how two cyclic signals align.

Read the lesson ↗
Pitch

The perceived high-or-low quality of a sound. For a steady pure tone it is closely related to frequency; complex sounds need more care.

Read the lesson ↗
Pitch class

An octave-related group of pitches treated as equivalent within a musical system, such as the different Cs in a twelve-note framework.

Read the lesson ↗
Polyrhythm

The simultaneous use of different rhythmic divisions or patterns, such as three evenly spaced events against two over one shared duration.

Read the lesson ↗
Register

The part of a pitch range a sound occupies. Moving a chord into another register changes actual frequencies even if its note classes stay the same.

Read the lesson ↗
Release

The ending stage after an excitation or key hold stops. In a synthesizer envelope it is often the time taken to fall to silence.

Read the lesson ↗
Resonance

An enhanced response near a system’s characteristic frequencies when driven. Loss, coupling and the driving conditions affect its strength and width.

Read the lesson ↗
Reverberation

A decaying field of overlapping reflections after and during a source sound, typically perceived as a continuation rather than separate repeats.

Read the lesson ↗
Rhythm

The timing pattern of events and durations. A changing rhythm can sit over an unchanged pulse and tempo.

Read the lesson ↗
RMS

Root mean square: square the samples, average them, then take the square root. It describes signal magnitude but is not a complete loudness model.

Read the lesson ↗
RT60

The time for a reverberant sound level to fall by 60 dB after excitation stops. A stated frequency band and measurement method matter.

Read the lesson ↗
Sample rate

The number of sample frames per second. In stereo, each frame contains a value for both channels.

Read the lesson ↗
Semitone

One of twelve equal steps per octave in twelve-tone equal temperament. Other tuning systems may assign different sizes to similarly named steps.

Read the lesson ↗
Sine wave

A smooth sinusoidal oscillation containing one frequency in the ideal steady case. Starting and stopping it adds time-dependent spectral effects.

Read the lesson ↗
Spectrum

A representation of a signal’s components across frequency. Its meaning depends on the time window, analysis and magnitude or power scale used.

Read the lesson ↗
Standing wave

A spatial vibration pattern formed by interacting waves under boundary conditions, with stationary nodes and antinodes in the ideal case.

Read the lesson ↗
Subdivision

A division of a beat into smaller time units. Equal subdivisions provide the grid used in this publication’s rhythm editor.

Read the lesson ↗
Sustain

The maintained part of a note. In an ADSR envelope, sustain names the level held after decay while the note remains active.

Read the lesson ↗
Syncopation

A rhythmic relationship in which events or accents work against established metrical expectations, often through anticipation, displacement or a crossed strong position.

Read the lesson ↗
Tempo

The rate of an identified musical pulse, commonly expressed in beats per minute. More foreground events do not necessarily mean a faster tempo.

Read the lesson ↗
Timbre

The qualities that help distinguish sounds beyond pitch and loudness, including spectral balance, onset, decay, noise and changes during a note.

Read the lesson ↗
Transient

A brief changing event, such as a note’s onset. A transient cannot be fully described by a single steady-state spectrum.

Read the lesson ↗
Voicing

The distribution of a chord’s notes across registers, voices and doublings. It specifies choices that a chord label leaves open.

Read the lesson ↗
Waveform

A graph or description of signal value against time. Its shape alone does not identify a real instrument.

Read the lesson ↗
Wavelength

The spatial distance between corresponding points in successive cycles of a travelling wave. At speed c and frequency f, wavelength is c/f.

Read the lesson ↗