Energy can accumulate
A system that stores energy in motion and restoring forces can respond especially strongly to a periodic drive near one of its resonances. The familiar swing analogy is useful: well-timed pushes can add energy repeatedly. Damping limits the response by removing energy. A resonance is therefore a property of a system and its losses, not simply another word for a loud sound.
Evidence: 1
Most instruments have several modes
A stretched string, enclosed air volume or wooden body usually supports more than one pattern of motion. Each mode has a characteristic frequency and decay. The excitation determines how strongly those modes are driven, and coupling determines how their energy reaches the air. A loudspeaker-driven room and a bowed string both involve resonance, but their mechanisms and boundaries differ.
Evidence: 2
Resonance need not produce a harmonic series
A bottle’s air cavity and neck can behave approximately as a Helmholtz resonator over a limited frequency range. A string supports a sequence of modes under different assumptions. The resonance lab compares ideal string and pipe patterns; it does not convert every resonator into one universal formula. Ask which physical approximation applies before interpreting a frequency list.
Evidence: 3
Listen for selectivity
Use the resonance lab to change length and inspect the allowed frequencies. Then connect the result to the air-column and string lessons. A resonant system may emphasize a frequency without generating it by itself: energy still needs to arrive from a pluck, bow, strike, airflow or electrical drive. That distinction helps explain why changing an instrument’s excitation can change timbre while much of its body stays the same.
Evidence: 4
A resonator selects and stores energy; an exciter supplies it.
Make the connection
A length becomes a note
Compare the mode frequencies of the available boundary models at the same length.
Open the experiment ↗Useful words
Resonance
An enhanced response near a system’s characteristic frequencies when driven. Loss, coupling and the driving conditions affect its strength and width.
See in glossary ↗Sources & further reading
These sources support the explanations and model assumptions. Recording credits are listed in the listening panels and the source register.
- Oscillations and simple harmonic motion ↗Joe Wolfe / UNSW Physclips · Undated
- Strings, standing waves and harmonics ↗Joe Wolfe / UNSW Music Acoustics · Undated
- Helmholtz resonance ↗Joe Wolfe / UNSW Music Acoustics · Undated
- How do woodwind instruments work? ↗Joe Wolfe / UNSW Music Acoustics · Undated