A logarithmic comparison
A decibel value expresses a ratio on a logarithmic scale. Doubling power corresponds to about +3.01 dB. Doubling amplitude corresponds to about +6.02 dB when power is proportional to amplitude squared and the comparison conditions match. These are two forms of the same relationship, not competing definitions. Always ask what quantity is being compared and what reference is being used.
Evidence: 1
The reference is essential
A recording meter using dBFS is referenced to digital full scale. Sound pressure level, dB SPL, is referenced to a pressure, conventionally 20 micropascals in air. A reading of −12 dBFS cannot be converted to a listening level without knowing the playback gain, transducers and acoustic conditions. The master volume on this website adjusts a digital signal, not a calibrated sound-pressure meter.
Evidence: 2
Make a numerical comparison
Imagine the same sine wave rendered first with peak amplitude 0.4 and then 0.2. Their amplitude ratio is 0.5, so the second is approximately 6.02 dB lower. Their frequency and waveform shape are unchanged. If the comparison instead changes harmonics or duration, a single gain difference no longer describes everything relevant to the listening experience.
Evidence: 3
Avoid a loudness shortcut
A fixed decibel difference does not guarantee that all people will report an exact loudness ratio. Frequency, duration, spectrum, context and hearing all matter. Use decibels to make a signal comparison precise, then describe the listening task separately. There is no need to turn playback up to test the arithmetic: the numbers and visual traces provide the same mathematical evidence at a modest volume or in silence.
Evidence: 4
The two common forms
Power ratio: ΔL = 10 log₁₀(P₂/P₁). Amplitude ratio under matched conditions: ΔL = 20 log₁₀(A₂/A₁). Zero amplitude has no finite decibel value relative to a positive reference.
A decibel value is meaningful only when its quantity and reference are clear.
Make the connection
Same pitch, different shape
Keep frequency and waveform fixed while observing the signal’s amplitude scale.
Open the experiment ↗Useful words
Decibel
A logarithmic measure of a ratio. A sound-pressure level, digital level or gain in decibels requires a stated quantity and reference.
See in glossary ↗Sources & further reading
These sources support the explanations and model assumptions. Recording credits are listed in the listening panels and the source register.
- What is a decibel? ↗Joe Wolfe / UNSW Physclips · Undated
- Quantization and decibels ↗Chris Donahue / Carnegie Mellon University · 2026
- The basic sinusoid ↗Chris Donahue / Carnegie Mellon University · 2026
- Equal loudness contours and audiometry ↗Joe Wolfe / UNSW Music Acoustics · Undated