One second is the reference
Frequency tells you how often a repeating event happens. One hertz, written Hz, means one cycle per second. A 250 Hz sine wave completes 250 cycles each second; one cycle takes 0.004 seconds, or 4 milliseconds. Frequency and period describe the same repetition from opposite directions. A waveform with a shorter period has a higher frequency.
Evidence: 1
The frequency of what?
An instrument sound can contain many frequency components. When a lab says the note is 250 Hz, it usually means a chosen fundamental or repetition rate, not that all its energy is at 250 Hz. A harmonic sound may also contain components at 500, 750 and 1,000 Hz. Raising the fundamental raises every harmonic in proportion if their harmonic numbers stay fixed.
Evidence: 2
Listen in ratios
Compare 200 with 400 Hz, then 400 with 800 Hz. The difference in hertz is different, but each pair has the ratio two to one. In the octave framework used here, both span one octave. Now compare 200 with 210 Hz and 800 with 810 Hz. Equal ten-hertz differences do not make equal musical intervals. A pitch scale cannot be understood by counting hertz alone.
Evidence: 3
A useful controlled experiment
Start with a sine wave to make the component frequency unambiguous. Keep the master volume fixed, make one frequency change, and observe how many oscillations fit into the displayed time window. Do not compensate by increasing volume when a low or high note seems weaker: playback equipment and hearing sensitivity influence that impression. The numerical readout remains useful even when the sound is difficult to hear.
Evidence: 4
Reciprocals
Period T = 1/f. For 250 Hz, T = 1/250 s = 4 ms. The unit hertz is equivalent to s⁻¹.
Frequency counts repetition; musical interval size usually depends on a frequency ratio.
Make the connection
Same pitch, different shape
Choose a sine wave and compare a frequency with twice that frequency.
Open the experiment ↗Useful words
Frequency
The number of cycles per second in a repeating process. Its unit is hertz, abbreviated Hz.
See in glossary ↗Hertz
The unit of frequency: one cycle per second. A 440 Hz sinusoid completes 440 cycles each second.
See in glossary ↗Period
The duration of one repeating cycle. For frequency f in hertz, period equals 1/f seconds.
See in glossary ↗Sources & further reading
These sources support the explanations and model assumptions. Recording credits are listed in the listening panels and the source register.
- Periodicity, period, and frequency ↗Chris Donahue / Carnegie Mellon University · 2026
- Additive synthesis ↗Chris Donahue / Carnegie Mellon University · 2026
- Note names, MIDI numbers and frequencies ↗Joe Wolfe / UNSW Music Acoustics · Undated
- Equal loudness contours and audiometry ↗Joe Wolfe / UNSW Music Acoustics · Undated