Reeds / Sound-production study

Clarinet

A flexible reed and nearly cylindrical bore form a feedback system with a distinctive low-register pattern.

A clarinet shows a reed against its mouthpiece, a straight keyed body and a gently flared bell.

How it makes sound

A single reed controls flow into a nearly cylindrical bore; the bore also influences the reed’s motion.

Single reed
A flexible reed changes the opening through which the player’s air flows.
Nearly cylindrical bore
The air column supplies pressure feedback and a distinctive resonance pattern.
Holes and bell
Fingerings select resonances; open tone holes and the bell help radiate sound.

The reed is a valve in a feedback loop

The clarinet’s reed bends in response to the pressure difference across it, changing the opening through which air can flow. The air column responds, and its changing pressure influences the reed in return. The player supplies the energy through breath, but reed and bore together turn that energy into sustained oscillation.

A simple model treats the bore as a cylinder effectively closed at the reed end and open farther down. Its low resonances are near odd multiples of the lowest one. The model helps explain why the clarinet’s register change is approximately a twelfth rather than the octave familiar from an ideal open cylinder. Real tone holes, reed behaviour and bore details modify this picture.

Evidence: 1

Odd-rich does not mean even-free

The low register often has a strong odd-harmonic character. That statement is a tendency, not a promise that every even-numbered spectral component must be zero. The reed’s nonlinear behaviour, playing level and register affect the radiated spectrum. A measured sound spectrum must not be confused with a diagram of ideal bore resonances.

In musical terms, you can preserve a pitch while changing how prominent its upper components are. This allows a note’s colour to shift within a phrase. It also explains why a synthetic square wave can suggest one aspect of a clarinet without sounding like a complete instrument. An instrument is more than the list of harmonic numbers that a basic model permits.

Evidence: 1

Compare harmonic balance, then boundary conditions

In the harmonic builder, keep the fundamental fixed and compare a mixture dominated by odd harmonics with one that also contains strong even harmonics. Keep playback level steady and inspect which bars changed. Then compare open and closed air columns of the same length in the resonance lab.

These are different comparisons. The first changes the spectrum of an electronically generated sound. The second changes an ideal resonator’s boundary condition and predicted resonances. Neither computes the reed’s motion or a clarinet fingering. Separating those questions prevents a common mistake: assuming that a resonator’s mode diagram is already a complete recipe for the sound leaving a real instrument.

Keep this in mind

The clarinet’s odd-rich low-register behaviour comes from a coupled reed-and-bore system, with important real-world exceptions.

Make the connection

Build a sound

Compare odd-rich and mixed-harmonic spectra while preserving the fundamental frequency.

Open the experiment ↗

Sources & further reading

These sources support the explanations and model assumptions. Recording credits are listed in the listening panels and the source register.

  1. Clarinet acoustics: an introduction ↗Joe Wolfe, UNSW Music Acoustics · Undated
Full source and rights register ↗