Timbre & spectra / Side by side

Harmonic and inharmonic: regularity inside a sound

Compare frequency components that line up as whole-number multiples with components that do not. This describes structure, not artistic quality.

The relationship between partials

A partial is a frequency component within a sound. Harmonic partials have frequencies that are whole-number multiples of a shared fundamental. An ideal 150 Hz harmonic tone can contain components at 150, 300, 450 and 600 Hz. Inharmonic partials do not all fit that pattern. Their spacing can still be orderly and their musical role can be essential.

The distinction is not identical to pitched versus unpitched. Some sounds with inharmonic partials have a recognizable pitch, while a short or noisy sound may not offer a clear pitch even when a resonant component stands out. Real strings can also have slightly stretched partials because stiffness changes their vibration.

Evidence: 1

Compare two imagined spectra

For a numerical thought experiment, compare A: 150, 300, 450 Hz with B: 150, 317, 469 Hz, using equal component amplitudes. A repeats every 1/150 second. B has no similarly short common repeating period. The lower component has stayed fixed, but the relationships above it have changed. An equal-volume comparison would isolate those relationships more usefully than making B louder.

The harmonic builder explores A-type spectra: its sliders control integer multiples. It cannot turn a harmonic recipe into a faithful bell merely by reducing the fundamental. For an inharmonic instrument, the resonator’s mode frequencies, individual decay times and striking position all matter. Use the instrument studies to connect that limitation to an actual object.

Evidence: 1 · 2

Structure is not a preference scale

“Inharmonic” is not a synonym for wrong. Metallic percussion, tuned bars and prepared sounds can rely on it. Research comparing listener groups also cautions against treating preference for harmonic sounds as a universal biological rule. Keep three questions apart: what frequency structure is present, what pitch is heard, and what a listener values in a particular musical setting.

Evidence: 3

PropertyHarmonic exampleInharmonic example
Three component frequencies150, 300, 450 Hz150, 317, 469 Hz
Multiples of 150 Hz1, 2, 31, about 2.11, about 3.13
Short exact repetition6.67 ms in this ideal exampleNot 6.67 ms
Musical judgementDepends on contextDepends on context
Keep this in mind

Harmonicity describes frequency relationships; it does not rank instruments or traditions.

Make the connection

Build a sound

Build harmonics 1–3 at equal slider values. Read the component frequencies and identify their common fundamental.

Open the experiment ↗

Sources & further reading

These sources support the explanations and model assumptions. Recording credits are listed in the listening panels and the source register.

  1. How harmonic are harmonics? ↗Joe Wolfe / UNSW Sydney · Undated
  2. Sound Synthesis — Handbook for Acoustic Ecology ↗Barry Truax, editor / Simon Fraser University · Undated
  3. Indifference to dissonance in native Amazonians reveals cultural variation in music perception ↗Josh H. McDermott, Alan F. Schultz, Eduardo A. Undurraga and Ricardo A. Godoy / Nature · 2016-07-28
Full source and rights register ↗